Clock Systems
Syncroline
KT3000/KT3000 GPS Master Clock
The Krontek KT3000 Master Clock is provided in two models, both products have a temperature compensated crystal oscillator (TCXO) as their time base. The model KT3000GPS includes a GPS module that provides millisecond accuracy and automatic time setting. The KT3000 will also operate as a clock code format converter. That is - it can receive and synchronise itself to one type of time correction format and transmit in another.
Brochure : Syncroline™ KT3000/KT3000GPS Master Clock
File Size 59KB
KT4000 Master Clock
The Krontek KT4000 Master Clock combines the functionality of a clock and signal controller and can be programmed via the Ethernet or LCD user interface. The KT4000 can drive a clock load of up to 2 amps at 24VDC. For example: it can directly support 100 Krontek Syncroline SL300 analogue clocks. The KT4000 has 4 control circuits that can be programmed from any PC on the network via telnet or using the front control panel. The output relays may also be manually controlled via the network or front panel. Network pass code protection is provided to prevent unauthorized access.
Brochure : Syncroline™ KT4000 Master Clock
File Size 56KB
KT2050 Network Clock Controller
The Krontek KT2050 Slave Clock Controller converts network (SNTP) time to the electrical protocols required by analogue and digital slave clocks. The Controller has an auto-sensing 10/100Mbit Ethernet Interface and can drive a clock load of up to 750mA at 24VDC. The Controller derives its time from the network via an SNTP Server. SNTP time can be sourced externally from the Internet or from local timeservers such as the Krontek KT2000 GPS Timeserver.
Brochure : Syncroline™ KT2050 Clock Controller
File Size 271KB
KT2000 GPS SNTP Timeserver
The Krontek KT2000 Network Timeserver provides SNTP compliant time to compatible clients. Its time reference is the GPS satellite system that provides a time source traceable to the American National Institute of Standards and Technology (NIST). Maximum accuracy is within 0.001s (one thousandths of a second) The Timeserver is equipped with an auto-sensing 10/100Mbit Ethernet Interface.
Brochure : Syncroline™ KT2000 GPS SNTP Timeserver
File Size 41KB
KT2010 Signal Controller
The Krontek KT2010 Signal Controller is a Programmable Controller with an auto sensing 10/100Mbit Ethernet Interface. It provides two output control relays and two programmable control inputs. Circuit 2 may be configured to function as a master clock control to synchronize analogue or digital slave clocks to network time. The Controller derives its time from the network via an SNTP Server. SNTP time can be sourced from the Internet or from timeservers such as the Krontek KT2000 GPS Timeserver.
Brochure : Syncroline™ KT2010 Network Based Signal Controller
File Size 62KB
| Features: | Large easy to read Dial Acrylic Lens suitable for food industry Slimline Anodised Aluminium case |
 Brochure : Syncroline System ClocksFile Size 235KB |
| Dimensions: | 300mm dia, Depth 54mm |
SL455 Digital H:M
| Features: | Display is legible at over 50 meters 3 Brightness Levels 12/24hr Display Selection |
 Brochure : Syncroline System ClocksFile Size 235KB |
| Dimensions: | 55mm Digits Enclosure: H100mm, W250mm, D58mm (top) D48mm (bottom) |
SL160S Digital H:M:S
| Features: | Programmable time zone offsets - suitable for "World Clock" displays Display is legible at over 50 meters 3 Brightness Levels 12/24hr Display Selection Selectable Seconds or AM/PM indication |
 Brochure : Syncroline System ClocksFile Size 235KB |
| Dimensions: | Hour / Minute digits 65mm high Seconds / AM/PM digits 50mm high Enclosure: H135mm, W398mm, D90mm (top) D78mm (bottom) |
SL160C Digital Calendar
| Features: | Programmable time zone offsets - suitable for "World Clock" displays Display is legible at over 50 meters 3 Brightness Levels 12/24hr Display Selection Selectable Seconds or AM/PM indication |
 Brochure : Syncroline System ClocksFile Size 235KB |
| Dimensions: | Hour / Minute digits 65mm high Seconds / Month digits 50mm high Alpha characters 50/35mm high Enclosure: H215mm, W398mm, D90mm (top) D70mm (bottom) |
Syncroline Dual Theatre Timer
| Features: | Stainless Steel Flush Mount 3 Brightness Levels 1 Gang Wall Plate Controller |
 Brochure : Syncroline System ClocksFile Size 235KB |
| Dimensions: | Hour / Minute digits 65mm high Seconds / AM/PM digits 50mm high Enclosure: H340mm, W452mm, D45mm |
Simplex
6400 Master Clock
The simplex 6400 Master Clock provides accurate time keeping for control of Simplex Slave Clocks such as Minute Impulse and Synchronous Wired. In addition the 6400 has programmable time and day of week referenced control of six output circuits. A liquid crystal display shows the time, day of week, and the status of the six output circuits. The display is also used for programming, editing and reviewing of stored programs.
Brochure : Master Clock Systems Series 6400
File Size 420KB
6500 Master Clock
The 6500-2320 Master Clock is designed to be compatible with the full range of Simplex and other Master Clock Systems, providing Impulse, Synchronous-Wired and BCD digital time code outputs. A programming facility is provided for the control of local Electrical loads such as Bells/Signals, Lighting, Air-Conditioning, etc, on a time of day basis. Timekeeping is maintained for a minimum of 20 hours in the event of power failures, and upon restoration of mains power, Slave Clocks are restored to correct time and the status of all Control Circuits are updated to the correct state.
Brochure : Master Clock Systems Series 6500
File Size 395KB
0057 Series Sync Wired
Simplex -6 Synchronous Slave Clocks are driven by a 240VAC synchronous motor and a correction armature. Each clock varying from system time because for a power failure is individually and automatically corrected once each hour for synchronisation with the Simplex 6400 Master Clock. Correction range is 59 minutes slow, 55 seconds fast. Twelve-hour correction provides individual synchronisation of clocks up to 12 hours slow. This insures that even the most prolonged power interruption in individual clocks or the complete system will be compensated for automatically.
Brochure : Analogue Clocks Series 0057 Synchronous Slave Clocks Wired
File Size 137KB
0054 Series Impulse
Simplex -2 Minute Impulse Slave Clocks are individually checked for agreement with the Simplex 6400 Master Clock once each hour, providing uniform and accurate time. Any clock not in synchronisation with the 6400 will be automatically advanced or retarded as required. All clocks are connected to a 2 wire parallel circuit, 24VDC is the normal voltage. Each minute the 6400 emits an electrical impulse, which is feed to each clock advancing it one minute. Each hour, rapid impulses are transmitted from the 6400 to provide automatic hourly correction of slow clocks. The correction range of minute impulse clocks is 10 minutes fast and 15 minutes slow.
Brochure : Analogue Clocks Series 0054 Impulse Slave Clocks – SR2
File Size 137KB
6311-1234 Dual Theatre Timer
Simplex model 6311 theatre times are for use in hospitals delivery rooms, operating rooms, laboratories, schools and industrial applications, The dual theatre time is designed to keep track of vital timed events throughout an operating by providing surgeons and support staff with both interval time and accurate referenced and “real time” via Simplex 0057 series slave clock. This system is housed within an “air tight” sealed stainless steel cabinet complete with shatterproof acrylic enclosure.
Brochure : Dual Theatre Timer
File Size 711KB
Network & POE Clocks
KT160SN Digital Network Clock
The KT160SN Digital Clock provides an accurate and clearly readable time/date display. It can synchronize to an SNTP timeserver on your PC Network, operate as a slave clock on a Master Clock System or operate independently. It can also function as an up/down timer with the addition of the KT106 Timer Controller. A single KT160C can be configured as a master allowing up to 32 slave KT160 s or KT160C s to synchronize themselves via an RS485 communications line. A POE kit is also available.
Brochure : Krontek KT160SN Standard Clock
File Size 32KB
KT160CN Calendar Network Clock
The KT160CN Calendar Clock provides an accurate and clearly readable time/date display. It can synchronize to an SNTP timeserver on your PC Network, operate as a slave clock on a Master Clock System or operate independently. It can also function as an up/down timer with the addition of the KT106 Timer Controller. A single KT160C can be configured as a master allowing up to 32 slave KT160 s to synchronize themselves via an RS485 communications line. A POE kit is also available.
Brochure : Krontek KT160CN Time and Date Clock
File Size 41KB
Simplex OnTime Power over Ethernet
Introducing the revolutionary Simplex OnTime™ Power over Ethernet digital network clock, designed to effortlessly put everyone on the same time.
Simplex OnTime digital clocks plug into an Ethernet jack on your local area network. No AC plug is required, so installation is inexpensive and it’s easy to move clocks around. Power is supplied over standard Cat-5 cabling using the IEEE 802.3af Power over Ethernet standard, the same power source as Voice-over-IP telephones.
OnTime Analogue POE
Simplex OnTime clocks provide accurate, synchronized time throughout a facility in a sleek analogue format. Visible at over 100 feet, these clocks keep everyone on the same schedule. OnTime clocks utilize cutting-edge Power Over Ethernet (PoE) technology; a superior power source for analogue clocks because it eliminates the need for AC receptacles, individual batteries and allows for centralized UPS backup. The clocks plug directly into a standard Ethernet jack and draw both time updates and power from the network.
Brochure : Simplex OnTime Analogue POE
File Size 192KB
OnTime Digital POE
Red seven-segment LED display with 4-inch numerals that are visible at over 150 feet. Power over Ethernet technology lets you deploy a digital clock system without the cost of installing AC outlets, using your existing Ethernet LAN and the same network components as IP phones. Simple Network Time Protocol (SNTP) automatically sets time — no master clock or serial connection required. A standard Telnet session provides complete control over IP configuration, SNTP server address, time zone configuration, display format (12/24 hour) and clock status reporting.
Brochure : Simplex OnTime Digital H:M:S
File Size 252KB
Brochure : Simplex OnTime Digital H:M
File Size 291KB